VMware recommends having 3 or more physical NICs in a team for beaconing to work properly. If you have only 2 uplinks in a team, ESXi host will not be able to correctly determine which uplink has gone down.
Administrator has to configure link failure detection mechanism as part of teaming policy to detect uplink (pNIC0 and pNIC1) failures.
Considering this topology, which link detection mechanism would you recommend vSphere admin to configure in below mentioned failure scenarios:
1. Link Failure between Access and Distributed switch
2. Link Failure between Distributed Switch and Core Switch.
An Initiator is the storage device/endpoint that initiates SCSI request. Typically, Initiator serves the same purpose what SCSI adapter does. The only difference is, instead of physically cabling SCSI devices (like HDD, Tape Drives), an SCSI initiator send SCSI commands over an IP/Fiber Channel network.
This articles describes about Virtual Sockets, Virtual cores and Socket limitations of Traditional OS.
In this Article,we deep-dive into partitioning layout details of ESXi5.0 and partedUtil command line of ESXi
This Article explains about ESXi Architecture and & userworlds like hostd, vpxa, CIM Architecture etc..